If you are trying to install a double kitchen sink drain in your home, you may be confronted with a series of pipes that you must plumb correctly. Fitting a double sink drain with a dishwasher attachment or other utility attachment can Double sink hook up even more confusing, but you can easily put the basic drain together.
In Part 1 of this guide, you will learn how to fit the drains to the sink bowl, attach the trap arms to the wall sub and fit the connections to the drain tailpiece.
Before you proceed, you should take care to turn off your water supply at the mains pipe. Drain water from the area you wish to use, in this case the kitchen. Don't forget to turn the water back on once you have finished the drain water installation. You need to ensure "Double sink hook up" you have enough space in your kitchen sink drain hole for the drain attachment that you require. It is best to find a drain of a similar make to the sink that you own.
When you are ready, you can then add a layer of putty around the edge of the drain, and ensure that it is pressed down into the drain hole. The putty help to keep the drain in place. Once this is done, you can then proceed to fitting the drain.
The next part of the installation involves fitting the trap arm. The trap arm should be installed below a straight pipe attachment. Double sink hook up trap arm should be fitted to the drain-stub, which is done using a suitable washer, and a slip nut.
The washer usually has a beveled edge which then can be installed against the side of the drain stub. Once the "Double sink hook up" is added, you can then attach a small piece of pipe known as a tailpiece to the end of the drain below the sink.
Screw this into place using the nut, and then add the T-fitting to this tailpiece using a slip washer.
Level it up to the bevelled edge of the washer, s that it grips the pipe tightly. You can then fit it into position. Some pipe grease on the edge of the T-fitting will help it to move more easily. Sep Double sink hook up, Intelligent Double Sink Drain Scheme -image of properly installed how to install a garbage disposal - double trap installation is ideal, but most.
They make kits to do this for kitchen sinks —-Eastman /2 in.
x 16 in. Center Outlet Continuous Waste, Chrome - The Home Depot These are also made. Running water lines to a double sink is identical to the procedure used lines to a The drain line configuration is different, however, since you Double sink hook up to connect.